产品中心

你所在的位置:网站首页>产品中心
母料产品汇总表(Masterbatch summary)



包装薄膜改性材料及母料 汇总表
适用薄膜类型名称牌 号母料及薄膜特性
BOPP 

增挺

母料

ML 8002高挺度、低雾度、高光泽
BOPP、CPP

镀铝

增强

材料

ML7001增强镀铝覆着力,降低镀铝后表面张力衰减率
BOPE、CPEML7002增强镀铝覆着力,降低镀铝后表面张力衰减率
BOPP、CPP

低温

热封

材料

ML 9001降低薄膜的起始热封温度,增大热封强度,增宽热封温度范围
BOPE、CPEML 9002降低薄膜的起始热封温度,增大热封强度,增宽热封温度范围
BOPP、CPP

消光料

MF 5050RC-2低温热封型,低析出物、高雾度,极少透亮点、白点等疵点
BOPP、CPPMF 5050H高耐温型,低析出物、高雾度,极少透亮点、白点等疵点
CPEMF 5050E低析出物、高雾度,极少透亮点、白点等疵点
BOPEMF 5050BE低析出物、高雾度,极少透亮点、白点等疵点
BOPP、CPP、下吹PP、POF

防雾

母料

M 1505FP高效高含量,优异的热防雾和冷防雾效果,无异味
CPE、PE吹膜、POFM 1505EP高效高含量,优异的热防雾和冷防雾效果,无异味
BOPEM 1505BE高效高含量,优异的热防雾和冷防雾效果,无异味
BOPP、CPP、下吹PP、POF

抗静电

母料

MA PP系列有效含量5%--80%,适用于低温低湿环境,不起粉,起效快,效果持久
BOPE、CPE、PE吹膜、POFMA PE系列有效含量5%--80%,适用于低温低湿环境,不起粉,起效快,效果持久
BOPP、CPP、下吹PP、POF

爽滑

母料

MS PP系列有效含量5%--80%,优良爽滑性,不起粉,起效快,效果持久
BOPE、CPE、PE吹膜、POFMS PE系列有效含量5%--80%,优良爽滑性,不起粉,起效快,效果持久
所有薄膜品种M 61SL系列有效含量10%--40%,优异的高温爽滑性,不起霜,低雾度、高光泽,尤其适合无溶剂复合基材膜、镀铝基材膜
BOPP抗粘连母料MB 3005PB球形微珠抗粘剂,优异抗粘性,低摩擦系数,低雾度高光泽,适合浅网印刷
BOPP烟膜MB 3005SB球形微珠抗粘剂,优异抗粘性,优异耐磨伤性,低雾度高光泽
BOPP MB 05PP优异抗粘性,开口性好,极佳分散性,低雾度
CPP、下吹PP、POFMB PP系列有效含量5%--20%,平均粒径5--20μm,优异抗粘性,开口性好,极佳分散性,低雾度
BOPEMB 3005EB球形微珠抗粘剂,优异抗粘性,低摩擦系数,低雾度高光泽,适合浅网印刷
CPE、PE吹膜MB PE系列有效含量5%--20%,平均粒径5--20μm,优异抗粘性,开口性好,极佳分散性,低雾度
CPP、下吹PP、POF抗粘/爽滑母料MBS PP系列有效含量5%--20%,平均粒径5--20μm,优异抗粘性和爽滑性,开口性好,极佳分散性,低雾度
CPE、PE吹膜MBS PE系列有效含量5%--20%,平均粒径5--20μm,优异抗粘性和爽滑性,开口性好,极佳分散性,低雾度
CPP、下吹PP、POF

增透

母料

MT 205PP系列高透明性,不增加薄膜刚性和脆性
CPP、下吹PP、POF

增刚

母料

MT 05PP系列高刚性,高透明性,不增加薄膜脆性
CPP、下吹PP、POF抗色变母料MAO PP系列提高热稳定性,抗热氧化及高电离引起色变
CPE、PE吹膜MAO PE系列提高热稳定性,抗热氧化及高电离引起色变
注:更多牌号及详细资料请与技术热线联系+86-0-15338992220



Modified Masterbatches and Materials List
Field of ApplicationNameBrandCharacteristics
BOPP Stiffness MasterbatchML 8002Low haze and high gloss , high stiffness.
BOPP、CPPAluminized Reinforcement MaterialML7001Enhance the coating force of aluminum plating and reduce the damping rate of wetting tension after aluminum plating.
BOPECPEML7002Enhance the coating force of aluminum plating and reduce the damping rate of wetting tension after aluminum plating.
BOPP、CPPLow Temperature Heat Sealing MaterialML9001The initial heat-sealing temperature of the film is reduced, the heat-sealing strength is increased, and the heat-sealing temperature range is widened
BOPECPEML9002The initial heat-sealing temperature of the film is reduced, the heat-sealing strength is increased, and the heat-sealing temperature range is widened
BOPP、CPPMatt MaterialMF 5050RC-2Low temperature sealable type, less die "hang-up", high haze, low gloss,fewer appearance defects
BOPPCPPMF 5050HHigh temperature resistant typeless die "hang-up", high haze, low gloss,fewer appearance defects
CPEMF 5050EHigh haze, low gloss,less die "hang-up", fewer appearance defects
BOPEMF 5050BEHigh haze, low gloss,less die "hang-up", fewer appearance defects
BOPP、CPP、PP blown film、POFAntifogging MasterbatchM 1505FPHigh efficiency, high effective conent,excellent hot and cold antifogging properties, free of bad odours.
CPEPE blown filmPOFM 1505EPHigh efficiency, high effective conent,excellent hot and cold antifogging properties, free of bad odours.
BOPEM 1505BEHigh efficiency, high effective conent,excellent hot and cold antifogging properties, free of bad odours.
BOPP、CPP、 PP blown film、POFAntistatic MasterbatchMA PP seriesEffective content 5%--80%,Particularly suitable for low-temperature, low-humidity environments. Quick effect and lasting antistatic properties
BOPECPEPE blown filmPOFMA PE seriesEffective content 5%--80%Particularly suitable for low-temperature, low-humidity environments. Quick effect and lasting antistatic properties
BOPP、CPP、PP blown film、POFSlip MasterbatchMS PP seriesEffective content 5%--80%,Excellent slip properties, low haze,quick effect and lasting slip properties.
BOPECPEPE blown filmPOFMS PE seriesEffective content 5%--80%Excellent slip properties, low haze,quick effect and lasting slip properties.
All film varietiesM 61SL seriesEffective content 10%--40%Excellent hot-slip properties without blooming, low haze and high gloss,especially suitable for solvent-free composite substrate films and aluminized substrate films
BOPPAntiblocking MasterbatchMB 3005PBMicroglass-beads antiblocking masterbatch.Applicable for flat screen-printing film. Excellent antiblocking properties,  low C.O.F, low haze and high gloss.
BOPP cigarette packing filmMB 3005SBMicroglass-beads antiblocking masterbatch. Excellent antiblocking properties, excellent scratch resistance, low haze and high gloss.
BOPP MB 05PPExcellent antiblocking properties and opening properties, excellent dispersion, low haze.
CPPPP blown filmPOFMB PP seriesEffective content 5%--20%average diameter 5--20μmExcellent antiblocking properties and opening properties, excellent dispersion, low haze.
BOPEMB 3005EBMicroglass-beads antiblocking masterbatch.Applicable for flat screen-printing film. Excellent antiblocking properties, low haze and high gloss.
CPEPE blown filmMB PE seriesEffective content 5%--20%average diameter 5--20μmExcellent antiblocking properties and opening properties, excellent dispersion, low haze.
CPP、PP blown film、POFAntiblocking / Slip  MasterbatchMBS PP seriesEffective content 5%--20%,average diameter 5--20μm,Excellent antiblocking and slip properties and opening properties, excellent dispersion, low haze.
CPEPE blown filmMBS PE seriesEffective content 5%--20%average diameter 5--20μmExcellent antiblocking and slip properties and opening properties, excellent dispersion, low haze.
CPP、PP blown film、POFTransparent  MasterbatchMT 205PP seriesHigh transparency, no increase in film rigidity and brittleness
CPP、PP blown film、POFStiffening MasterbatchMT 05PP seriesHigh rigidity, high transparency, no increase in film brittleness
CPP、PP blown film、POFColor change resistant MasterbatchMAO PP seriesImprove thermal stability, resist color change caused by thermal oxidation and corona treatment
CPEPE blown filmMAO PE seriesImprove thermal stability, resist color change caused by thermal oxidation and corona treatment
Note: For more brands and details, please contact the technical hotline+86-0-15338992220


电话
消息
二维码
分享